
Licensed, insured, and code-correct from demo day to final walkthrough
Renovation Contractor Irvine CA Built for Real Homes
A Renovation Contractor Irvine CA homeowners call when the plan has to survive inspections, HOA rules, and a family still living in the house. We handle kitchens, bathrooms, additions, and whole-home updates across Orange County with CSLB-licensed crews, EPA Lead-Safe practices, and a schedule you can actually plan around. Free estimate, no pressure.
What's included
What Our Renovation Service Includes
Every renovation we run includes the core project management and construction work below. Specialty items like structural engineering, custom cabinetry, and appliance packages are quoted as line items so you can see exactly what they add.
Permits and Inspections
We pull the City of Irvine permits, post them on site, and schedule every inspection from rough framing through final. You get copies of the sign-offs at closeout.
Demolition and Disposal
Demo, haul-off, and dumpster rental are included. We protect adjacent floors and seal dust with zip walls, and we recycle metal and cardboard where the hauler allows.
Rough-In Coordination
Framing, electrical, plumbing, and HVAC rough-in are sequenced and inspected before drywall goes up. We use licensed subs and hold them to the same schedule you were promised.
Finish Carpentry and Tile
Drywall, texture, paint, tile, grout, trim, and cabinet installation are all in scope. We set cabinet runs with a laser level and cut tile with a wet saw for clean edges.
Fixture and Appliance Install
Kohler and Moen fixtures, lighting, and appliances are installed and tested before we close out. We hand over care notes for the finishes and manufacturer warranty paperwork.
Final Walkthrough and Closeout
We do an internal punch walk, then walk the job with you. Touch-ups, adjustments, and the final inspection happen in the last week, and you get a written closeout packet.
Service overview
What a Renovation Contractor Irvine CA Actually Does
A Renovation Contractor Irvine CA is a licensed building professional who manages the demolition, framing, rough-in, finish, and inspection phases of a residential remodel under one contract. That means pulling permits through the City of Irvine, coordinating plumbing and electrical subs, ordering lumber, drywall, tile, and countertops, and keeping the job compliant with the California Building Code. We do the sequencing so you are not the one chasing the tile setter who no-showed.
Irvine homes built from the 1970s through the 2000s are hitting the age where original cabinets, galvanized lines, and single-pane windows start failing at the same time. A renovator Irvine California homeowners trust will open a wall and find water damage, foundation cracks, or outdated wiring that was never on the original scope. We price those discoveries before we swing a sledgehammer, not after, so the budget holds together.
The service timeline
How Our Renovation Process Runs
The process flexes to the condition, but these checkpoints keep decisions clear.
Walkthrough and Scope
We walk the space with you, measure, and photograph existing conditions. Expect 60 to 90 minutes. You leave with a written scope and a realistic range, not a number pulled from the air. If the project needs structural engineering, we tell you at this stage.
Design and Permit
We finalize drawings, select finishes, and submit to the City of Irvine. Permit review typically runs two to four weeks depending on scope. We handle the submittal, the corrections, and the inspection scheduling so you are not on hold with the building department.
Demo and Rough-In
Demo takes one to three days. Then framing, electrical, plumbing, and HVAC rough-in go in, followed by the rough inspection. We protect floors and seal off dust with zip walls. This is the phase where hidden water damage or old knob-and-tube wiring usually shows up.
Finish Work
Insulation, drywall, tape, texture, paint, tile, cabinets, countertops, and fixtures go in on a sequenced calendar. We use a laser level for cabinet runs and a drywall lift on ceilings so the finish lines stay tight. Expect daily cleanup and a weekly progress update.
Punch List and Walkthrough
We do our own punch walk before you see it, then walk it with you. Touch-ups, adjustments, and final inspection happen in the last week. You get a written closeout with warranty terms, care notes for the finishes, and the inspection sign-off.
Tools & methods
Tools and Methods We Use on Every Job
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Milwaukee and DeWalt cordless kits
Drills, impact drivers, and reciprocating saws for demo and framing. Cordless keeps the job site clean and avoids tripping hazards from extension cords.
Bosch laser level
Sets cabinet runs, tile lines, and door heights so the finish work stays square across long walls.
Drywall lift
Lifts and holds ceiling panels so two people can install what would otherwise take four, which cuts labor hours on every ceiling.
Wet tile saw and grout float
Cuts porcelain and ceramic cleanly and sets grout lines consistent across the floor and shower walls.
Air compressor and nail gun
Drives framing nails and trim brads fast and consistent, which matters on long trim runs and cabinet installs.
Concrete mixer
Mixes small batches for footings, patios, and slab repairs without waiting on a delivery truck.
Use cases
When Irvine Homeowners Call Us
These examples show how the service framework adapts rather than forcing every call through one repair.

Turtle Rock Hall Bath Rebuild
Original 1970s tile, a shower pan that had been leaking into the subfloor, a cast-iron drain at the end of its life, and a single vanity with no storage. → Full gut to studs, new plywood subfloor, new drain to current code, waterproofing membrane, and a curbless shower with a bench. The bath was rebuilt in three and a half weeks and the inspector signed off first pass.
Quail Hill Aging-in-Place Update
A primary bath with a high tub-shower combo, narrow doorways, and no blocking for grab bars. The owners wanted to stay in the home but the bathroom was becoming unsafe. → We widened the doorway to 36 inches, converted the shower to a curbless entry with a bench and grab bar blocking, and adjusted outlet and lighting heights to ADA Compliance. The project ran four weeks and kept the owners in the house.
Problems we solve
Renovation Problems We Solve for Irvine Homes
Older Irvine homes hide problems behind drywall, and newer ones hide shortcuts. Here are the issues we run into most and how we handle them.
Water damage behind tile and under sinks
We open the wall during demo, probe the subfloor, and replace any soft plywood or framing before new tile goes down. If mold growth is present, we contain the area and remediate before finish work starts.
Permitting delays stalling the schedule
We submit complete drawings the first time and track corrections daily. Our Irvine permit experience means we know what the plan checker will flag, so we fix it before submittal rather than after.
Subcontractor no-shows and gaps
We hold our subs to a written schedule with penalties for missed windows, and we keep backup trades on call. You get one project manager who owns the sequence, not five phone numbers.
Budget overruns from hidden conditions
We price known conditions up front and give you a written change order with photos before any added work proceeds. You approve the number before we spend the money.
Pricing process
What Renovation Work Costs in Irvine
$18,000 - $300,000 depending on scope
Scope and square footage
A hall bath and a whole-home gut are different projects. Square footage, the number of rooms, and whether walls move all drive the labor and material totals.
Structural changes
Removing a load-bearing wall requires an engineered beam, a permit, and additional inspection. That adds design and framing cost but opens the layout.
Plumbing and electrical relocation
Moving a sink or adding circuits means rough-in work behind the wall. Keeping fixtures in place saves money; relocating them adds labor and inspection scope.
How much does a Renovation Contractor cost in Irvine CA?
Typical 2026 pricing in Irvine runs $18,000 to $35,000 for a hall bath, $45,000 to $95,000 for a full kitchen, and $120,000 to $300,000 for a whole-home gut. Cost depends on square footage, whether walls move, finish level, and permit scope. We give a written line-item estimate after the walkthrough so you can see where the money goes.
What does a Renovation Contractor do in Irvine California?
A Renovation Contractor in Irvine California manages the full remodel: permits, demolition, framing, rough-in, inspections, and finish work under one contract. That includes coordinating plumbing and electrical subs, ordering materials, and keeping the job compliant with the California Building Code. You get one project manager and one schedule instead of five separate trades.
Do I need a Renovation Contractor for my Irvine home?
If the work involves moving walls, new electrical circuits, plumbing relocation, or a kitchen or bath reconfiguration, Irvine requires permits and a licensed contractor. Cosmetic work like paint and flooring does not. When in doubt, call us and we will tell you honestly whether your project needs a permit or a handyman.
How do I hire a renovator in Irvine CA?
Verify the CSLB license, confirm liability and workers' comp coverage, and ask for two recent Irvine references you can call. Get a written scope with line items, not a lump sum. Ask who pulls the permit and who handles inspections. We provide all of that at the estimate stage, and you can check our license before you sign.
Ready when you are
Get Your Renovation Contractor Irvine CA Estimate
We schedule Irvine walkthroughs within five business days and give you a written line-item scope, not a lump sum. Licensed, bonded, and insured with a CSLB General B License. Call (949) 236-6306 and tell us what you want to change.

Talk with the local team
Request Renovation Contractor
Call (949) 236-6306 or email info@peakstructgroup.com to schedule your free estimate. We answer the phone Monday through Friday from 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. For emergencies, call any time and we will get back to you as soon as possible.



