Commercial General Contractor

Tenant improvements, office remodels and retail construction across Irvine

Commercial General Contractor in Irvine for Build-Outs That Open On Time

A Commercial General Contractor in Irvine manages your tenant improvement, office build-out or retail construction from permit to punch list. PeakStruct Group runs the trades, the inspections and the schedule so your doors open on the date you promised. Whether you are fitting out a suite in the Irvine Business Complex or remodeling a clinic near Spectrum, we handle the commercial construction contractor work that keeps Orange County businesses operating.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Our Commercial General Contracting Services Irvine CA Include

Our commercial general contracting services Irvine CA cover the full build-out from permit to closeout. We handle the trades, the inspections and the paperwork. Finish selections and specialty equipment are priced as allowances so you see exactly what each choice costs before you commit.

01

Permit and Plan Check

We prepare and submit the tenant improvement package, respond to every plan-check comment and schedule all inspections. You do not chase the city; we do. Typical Irvine plan check runs 3 to 6 weeks.

02

Trade Coordination

Framing, electrical, plumbing, HVAC, fire and finish trades are scheduled in sequence with a two-week look-ahead. We confirm each crew 48 hours out and replace no-shows the same morning.

03

Material Procurement

We order lumber, drywall, concrete, tile and fixtures, and track lead times weekly. When a specialty item slips, we source an alternate from Home Depot or Lowe's pro desks and get your approval before substituting.

04

Site Supervision

An OSHA 30 trained supervisor is on site daily. We post the site plan, protect existing finishes and keep a clean, safe work area. Daily logs and photos go to you each evening.

05

Closeout and Warranty

You get as-builts, warranty documents, final cleaning and a 1-year workmanship warranty. Punch list items close within 5 business days of the walk-through.

Service overview

What a Commercial General Contractor in Irvine Actually Does

A Commercial General Contractor in Irvine is a licensed construction firm that takes a commercial project from drawings to certificate of occupancy. That means pulling the tenant improvement permit, coordinating framing, mechanical, electrical and plumbing subs, ordering lumber, drywall and concrete, and holding every trade to the California Building Code. We run the daily site, schedule the inspections and keep the owner informed with a written two-week look-ahead. On a typical 3,000-square-foot office build-out, that is 8 to 12 weeks of coordinated work.

Irvine commercial space comes with its own rules. The Irvine Business Complex and Airport Area require tenant improvement plans that match the base building shell, and ADA Compliance upgrades usually trigger once you change more than a set percentage of a suite. As a commercial construction contractor Irvine California property managers call back, we read the CC&Rs before we mobilize, so you do not lose two weeks to a rejected plan check. If you need a Commercial General Contractor Irvine CA for tenant improvement work, we walk the space first and tell you what the city will actually require.

One Schedule, One ContactYou get a single project manager who owns the schedule and the budget, not a rotating cast of subs. We publish a two-week look-ahead every Friday, so your staff and your vendors know exactly when the electrical rough-in, drywall and paint phases hit. On a 4,000-square-foot retail build-out, that visibility is the difference between opening on schedule and eating two weeks of rent.
Permit and Code HandlingWe prepare and submit the tenant improvement package, respond to plan-check comments and schedule every inspection. Our team works to the California Building Code and ADA Compliance daily, and we keep a current CSLB General B License on file. When a code violation shows up on a final, we fix it before the inspector leaves the site rather than resubmitting and waiting another 10 business days.
Subs Who Show UpSubcontractor no-shows are the number one reason commercial jobs slip. We carry a bench of Orange County trades we have used repeatedly, and we confirm each crew 48 hours out. If a framer does not appear, we dispatch a replacement the same morning. That discipline is why property managers in the Irvine Business Complex keep our number for their next suite turnover.
Commercial General Contractor by PeakStruct Group
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Commercial Build-Out Process Runs

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Walk and Scope

We meet you at the space, measure it, and photograph existing conditions. You get a written scope and a ballpark range within 48 hours. On a 2,000-square-foot office, this walk takes about 90 minutes and covers power, HVAC, restrooms and ADA path-of-travel.

Stage 1
02

Drawings and Permit

We coordinate with your architect or bring one in, then submit the tenant improvement package to the city. Plan check in Irvine typically runs 3 to 6 weeks depending on the scope. We respond to every comment and do not mobilize until the permit is in hand.

Stage 2
03

Mobilize and Rough-In

Demo goes first, then framing, electrical, plumbing and HVAC rough-in. We protect existing finishes, set up dust barriers and post the OSHA 30 site plan. Rough inspections usually happen in weeks 2 through 4, and we schedule them the day the subs finish.

Stage 3
04

Finish and Inspect

Drywall, paint, tile, countertops and fixtures follow in sequence. We use laser levels and drywall lifts to keep walls flat and ceilings true. Final inspections for building, electrical, mechanical and fire typically land in weeks 8 through 12 on a mid-size build-out.

Stage 4
05

Punch and Handover

We walk the space with you, list every item, and close the punch list within 5 business days. You get as-builts, warranty documents and a 1-year workmanship warranty. Keys, access cards and final cleaning are handled before we pull off site.

Stage 5

Tools & methods

Tools and Methods We Use on Irvine Commercial Jobs

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Milwaukee and DeWalt cordless kits

Daily framing, drywall and trim work. Cordless keeps the site clean and lets crews move fast between phases.

02

Bosch laser level

Sets ceiling grid, wall layout and tile lines. Laser accuracy keeps long corridor walls flat and true.

03

Drywall lift

Hangs ceiling board safely on 9- to 12-foot commercial ceilings without a crew of four.

04

Makita reciprocating saw

Demo and rough openings. Controlled cuts protect existing structure and mechanical lines.

05

Concrete mixer

Patch work and small slab pours. On-site mixing avoids short-load delivery fees on small scopes.

06

Air compressor and nail guns

Framing, trim and cabinet install. Consistent fastener depth keeps finish carpentry tight.

07

Tile cutter

Restroom and break-room tile. Clean cuts on porcelain and ceramic reduce waste and grout lines.

Use cases

When Irvine Businesses Call Us

These examples show how the service framework adapts rather than forcing every call through one repair.

Commercial General Contractor
3,200 SF Office Suite TurnoverA professional services firm inherited a 3,200-square-foot suite with dated carpet, a chopped-up floor plan and insufficient power for a new server room. The lease commencement date was 11 weeks out, and the landlord required design approval before permits. → We reconfigured the walls, added a dedicated electrical circuit for the server room, replaced flooring and paint, and passed final inspection in week 9. The firm moved in with a week of buffer and no change orders above the contingency line.

1,800 SF Retail Remodel, Stayed Open

A Woodbridge retail operator needed new flooring, lighting and a reconfigured checkout counter but could not afford to close. The store had a peak season 10 weeks away and a landlord who wanted the work done in phases. → We ran demo and flooring at night, installed new LED lighting and rebuilt the counter in three phases. The store stayed open every business day and the remodel finished within three days of the original schedule, ahead of peak season.

Medical Clinic ADA Upgrade

A clinic near Spectrum triggered ADA Compliance upgrades when it altered more than the allowed percentage of its suite. The restroom, entry and path of travel all needed correction, and the clinic had a fixed opening date for new patients. → We surveyed the path of travel, priced the restroom and entry corrections, and folded them into the tenant improvement permit. One inspection covered everything, and the clinic opened on schedule with no post-occupancy corrections.

Problems we solve

Commercial Build-Out Problems We Solve in Irvine

Most commercial projects do not fail on the tools. They fail on permits, schedules and subs who disappear. Here are the problems Irvine owners bring us most often, and how we handle them.

ISSUE

Permitting delays stall the lease commencement date

We read the CC&Rs and base-building requirements before we draw, submit a complete package the first time, and respond to plan-check comments within 48 hours. Our Irvine submittals typically clear in 3 to 6 weeks.

SYMPTOM

Subcontractor no-shows push the schedule

We confirm every crew 48 hours out and keep a bench of Orange County trades on call. If a framer or electrician does not appear, a replacement is dispatched the same morning.

SIGN

Budget overruns surface after demo

We open walls during the walk-through where possible and carry a clearly labeled contingency line. Change orders are priced before work proceeds, so you always know the number.

ALERT

Code violations fail the final inspection

We build to the California Building Code and ADA Compliance from the first nail and self-inspect before calling the city. Our finals pass on the first visit on the large majority of Irvine jobs.

Pricing process

What Commercial Construction Costs in Irvine

$85 - $220 per square foot depending on scope, with general contractor fees at 12-18% of hard costs

Phase 01

Scope and finish level

A paint-and-carpet refresh costs a fraction of a full build-out with new walls, power and HVAC. Finish selections like tile, countertops and specialty lighting move the number significantly.

Phase 02

Permit and plan-check time

Longer plan check adds soft costs and delays revenue. A complete submittal shortens the cycle and reduces the carrying cost of an empty suite.

Phase 03

Existing building conditions

Older Irvine buildings may need panel upgrades, ductwork replacement or accessibility corrections that a newer shell does not. We survey these during the walk-through.

Questions before we arrive

Frequently Asked Questions

Commercial General Contractor
Call (949) 236-6306
How much does a Commercial General Contractor cost in Irvine CA?

Most Irvine commercial build-outs run $85 to $220 per square foot in 2026, depending on scope and finish level. A basic office tenant improvement sits near the low end; a medical or retail fit-out with casework and specialty lighting pushes higher. General contractor fees are typically 12 to 18 percent of hard costs. We give you a line-item range after a same-day walk-through.

What does a Commercial General Contractor do in Irvine California?

A Commercial General Contractor in Irvine California pulls the tenant improvement permit, coordinates all trades, manages the schedule and budget, and gets you to certificate of occupancy. We handle plan-check comments, inspections, subcontractor scheduling and closeout documents. You get one point of contact instead of chasing five subs.

Do I need a Commercial General Contractor for my Irvine business?

Yes, if your project involves structural work, new electrical or plumbing, or more than a cosmetic refresh. Irvine requires a licensed contractor for permitted commercial work, and most landlords require one for tenant improvements. Even a small office remodel usually triggers ADA Compliance upgrades once you alter a set percentage of the suite.

How to hire a commercial construction contractor in Irvine CA?

Verify the CSLB General B License, ask for a certificate of insurance, and get a line-item estimate rather than a lump sum. Ask how many Irvine tenant improvements they have completed and who their usual subs are. We provide all of that on the first call, plus references from property managers in the Irvine Business Complex.

Ready when you are

Get Your Commercial General Contractor in Irvine Estimate

Call (949) 236-6306 before noon and we will walk your Irvine space the same day. You get a written, line-item range within 48 hours and a schedule you can take to your landlord. Licensed, insured and code-correct across Orange County.

Commercial General Contractor

Talk with the local team

Request Commercial General Contractor

Call (949) 236-6306 or email info@peakstructgroup.com to schedule your free estimate. We answer the phone Monday through Friday from 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. For emergencies, call any time and we will get back to you as soon as possible.

3750 Barranca Parkway, Irvine, CA 92606, United States, Irvine, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now