Home Renovation Contractors

Licensed, insured, and code-correct from demo day to final walkthrough.

Home Renovation Contractors Irvine CA

Home Renovation Contractors Irvine CA handle the work most homeowners dread: tearing out a dated kitchen, reconfiguring a cramped bath, or rebuilding a whole floor after water damage. We pull the permits, coordinate every trade, and keep the job moving through Orange County inspections. If you want a home renovation company in Irvine California that shows up when it says it will, call (949) 236-6306 for a free estimate.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What's Included in a Renovation Scope

Every renovation scope we write covers the work needed to get from demo to final inspection. Here is what sits inside a standard contract, and what we quote separately when your project calls for it.

01

Permits and Plan Review

We prepare drawings, submit to the city, respond to plan-review comments, and meet the inspector at each phase. Permit fees are listed as a line item so you see the cost. Structural, electrical, and plumbing changes all get permitted.

02

Demolition and Debris Removal

Demo includes hauling away old cabinets, tile, drywall, and fixtures. We protect floors and seal dust with zip walls. On a typical bath, demo takes 2 to 3 days; a kitchen runs 3 to 5.

03

Rough-In Trades

Framing, plumbing, electrical, and HVAC rough-in are coordinated and inspected before drywall. We handle the sub scheduling so the rough inspection lands on the calendar date we gave you, not a week later.

04

Finish Work and Fixtures

Drywall, paint, tile, grout, cabinets, countertops, and fixture install are all in scope. We register manufacturer warranties on Kohler and Moen fixtures and hand you the paperwork at the final walkthrough.

05

Final Inspection and Handover

We walk the job with the inspector, correct punch-list items, and clean the site. You get the photo file showing what is behind the walls, warranty documents, and a final walkthrough before we close the contract.

Service overview

What Home Renovation Contractors Irvine CA Actually Do

Home Renovation Contractors Irvine CA is a licensed general contracting service that manages the demolition, framing, rough-in, finish, and inspection phases of a residential remodel under one contract. That means one crew accountable for the lumber, drywall, concrete, tile, and paint that go into your house, plus the subs who install them. We handle structural changes, layout reconfigurations, and cosmetic refreshes, and we keep the project compliant with the California Building Code from the first permit application to the final sign-off.

Irvine homes built in the 1970s through the 2000s are hitting the age where original kitchens, bathrooms, and flooring need real replacement, not another coat of paint. Add water damage from a slow supply-line leak or foundation cracks from clay soil movement, and a cosmetic project can turn structural fast. A house renovation contractor Irvine California homeowners trust should catch those problems before the walls close back up. If you have been searching for Home Renovation Contractors Irvine CA near me, start with a walkthrough and a written scope.

One Point of AccountabilityYou get one project manager, one schedule, and one phone number. When the tile setter and the plumber both need the same bathroom on the same day, we sequence them so nobody sits idle. That coordination is the difference between a 6-week bath remodel and a 14-week one.
Permits Handled CorrectlyStructural changes, electrical panel upgrades, and bathroom relocations all need permits in Irvine. We prepare the drawings, submit to the city, and meet the inspector on site. Unpermitted work can surface at resale and cost thousands to correct, so we keep the paper trail clean.
Trade Pricing, Not RetailWe buy lumber, drywall, and tile at contractor pricing and pass the savings into the scope. On a mid-range kitchen, that difference often covers the cost of upgraded countertops or a Kohler fixture package you would otherwise cut from the budget.
PeakStruct Group serving Irvine, California
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Renovation Process Runs

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Walkthrough and Scope

We walk the house with you, measure the rooms, and photograph existing conditions. You get a written scope with line-item pricing within 3 business days. If the project needs structural engineering, we flag it here before you commit to anything.

Stage 1
02

Design and Permits

We finalize layouts, select materials, and prepare permit drawings. Irvine plan review typically runs 3 to 6 weeks depending on scope. We submit, respond to comments, and pull the permit before a single hammer swings.

Stage 2
03

Demo and Rough-In

Demo takes 2 to 5 days on a typical kitchen or bath. Then framing, plumbing, electrical, and HVAC rough-in go in, followed by the rough inspection. We protect floors and seal off dust with zip walls so the rest of the house stays livable.

Stage 3
04

Finishes and Fixtures

Drywall, tile, cabinets, countertops, paint, and fixtures go in over 2 to 4 weeks on a bath, longer on a kitchen. Our tile cutter and drywall lift keep the finish work tight, and we check every door swing and drawer pull before we call it done.

Stage 4
05

Final Inspection and Handover

We walk the job with the city inspector, correct any punch-list items, and clean the site. You get the photo file, warranty documents, and a final walkthrough. If something needs adjustment in the first year, you call us and we come back.

Stage 5

Tools & methods

Tools and Methods We Bring to the Job

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Milwaukee and DeWalt cordless kits

Drills, impact drivers, and reciprocating saws used daily for framing, demo, and fixture install. Cordless keeps the site free of trip hazards and lets crews work in rooms without power.

02

Bosch laser level

Sets cabinet lines, tile rows, and door heights to within a millimeter. Laser levels catch a sloped floor before cabinets go in, which saves a callback later.

03

Drywall lift

Holds full sheets in place on ceilings and high walls so the crew can fasten them accurately. It cuts install time on a ceiling by half and reduces the risk of cracked joints.

04

Tile cutter and wet saw

Cuts porcelain and ceramic tile cleanly for showers, backsplashes, and floors. Clean cuts mean tight grout lines and fewer chipped edges on visible surfaces.

05

Air compressor and nail guns

Fastens framing, trim, and cabinet boxes quickly and consistently. Consistent nail depth matters on trim work where a proud nail head shows through the paint.

06

Concrete mixer

Mixes small batches for footings, patios, and slab repairs. On-site mixing lets us match the existing concrete color and cure time without waiting on a delivery.

Use cases

When Irvine Homeowners Call Us

These examples show how the service framework adapts rather than forcing every call through one repair.

Home Renovation Contractors
Woodbridge Kitchen: Leak Repair to Full RebuildA 1982 kitchen with original cabinets, a dishwasher supply line that had been leaking into the subfloor for months, and a layout that blocked the work triangle. The drywall behind the cabinets was soft to the touch. → We replaced the subfloor section, re-ran the supply line, and rebuilt the kitchen with new cabinets, quartz countertops, and a tile backsplash. The layout opened the work triangle, and the project finished in 7 weeks against a 7-week schedule.

Great Park Master Bath: Cracked Pan Replacement

A builder-grade master bath with a cracked shower pan that had been leaking into the ceiling below. Tile was lifting off the wall, and the vanity showed water damage at the base. → We tore the shower to the studs, installed a new pan and waterproofing membrane, re-tiled the shower and floor, and replaced the vanity and fixtures. The leak stopped, and the bath finished in 5 weeks.

Northwood Full House: Roof Leak to Whole-Home Renovation

A slow roof leak had damaged ceiling drywall in three rooms. The kitchen and both baths were original to the 1980s build, and the electrical panel was undersized for modern appliances. → We repaired the roof, replaced the damaged drywall and insulation, upgraded the electrical panel, and renovated the kitchen and both baths in one contract. The project finished in 14 weeks with a documented photo file of every wall cavity.

Problems we solve

Renovation Problems We Solve Before They Spread

Most renovation surprises hide behind drywall or under flooring. Here are the ones we catch most often on Irvine projects, and what happens if they go unaddressed.

ISSUE

Slow supply-line leaks behind cabinets

We pressure-test supply lines during rough-in and replace any line showing corrosion or pinhole leaks. If we find existing water damage during demo, we dry the cavity, treat for mold, and replace the affected drywall and insulation before the finish goes back on.

SYMPTOM

Foundation cracks from clay soil movement

We inspect the foundation during the walkthrough and bring in a structural engineer when cracks exceed a quarter inch. If the fix is drainage correction or piering, we scope it before the interior work starts so the renovation does not mask a structural problem.

SIGN

Permitting delays stalling the schedule

We prepare complete permit packages and respond to plan-review comments within 48 hours. On Irvine projects, we submit early and track the review status weekly so the permit is in hand before demo starts.

ALERT

Subcontractor no-shows and trade stacking

We schedule trades in sequence with buffer days built in, and we confirm each sub 48 hours out. If a sub falls through, we have backup crews on call in Orange County who can step in without restarting the inspection sequence.

Pricing process

What Renovation Work Costs in Irvine

$25,000 - $400,000 depending on scope

Phase 01

Scope and square footage

A hall bath and a master suite are different projects. Square footage drives material quantities, labor hours, and the number of inspections required. A 40-square-foot bath and a 120-square-foot bath can differ by $30,000 or more.

Phase 02

Structural changes

Moving a load-bearing wall or adding a beam requires engineering, permits, and additional inspection. That scope adds $8,000 to $25,000 depending on the span and whether a steel beam is needed.

Phase 03

Material grade

Builder-grade tile and stock cabinets sit at one end; porcelain slab and custom cabinetry at the other. The material line can swing by 40% on the same layout, so we price both options when you are deciding.

Questions before we arrive

Frequently Asked Questions

Home Renovation Contractors
Call (949) 236-6306
How much do Home Renovation Contractors cost in Irvine CA?

Typical 2026 pricing in Irvine runs $25,000 to $45,000 for a mid-range bathroom remodel, $60,000 to $120,000 for a kitchen, and $150,000 to $400,000 for a full-house renovation depending on square footage and structural scope. Those ranges include labor, materials, and permits. Structural changes, layout reconfigurations, and high-end finishes push toward the top. Call (949) 236-6306 for a free estimate tied to your actual scope.

What do Home Renovation Contractors do in Irvine California?

They manage demolition, framing, plumbing, electrical, drywall, tile, cabinetry, countertops, paint, and final inspection under one contract. That includes pulling permits, coordinating subcontractors, and meeting the city inspector at each phase. A good crew also catches problems behind the walls, like water damage or outdated wiring, before the finish goes back on. We handle the whole sequence so you are not hiring and scheduling six separate trades yourself.

Do I need Home Renovation Contractors for my Irvine home?

You need one when the work involves structural changes, moving plumbing or electrical, or pulling permits, which covers most kitchens, bathrooms, and full-house projects. Cosmetic work like paint and flooring can go without. If you are unsure, a walkthrough settles it in under an hour. We tell you plainly whether your project needs a licensed contractor or can be handled by a handyman.

How do I hire a home renovation company in Irvine CA?

Verify the CSLB license, confirm general liability and workers comp coverage, and ask for a written scope with line-item pricing. Check that permits are included, not billed as an extra later. Ask how change orders are priced and who manages the schedule. Then call references from projects similar to yours. We provide all of that upfront, and you can reach us at (949) 236-6306 to start the conversation.

Ready when you are

Get Your Home Renovation Contractors Irvine CA Estimate

We walk the house, measure the rooms, and hand you a written scope with line-item pricing within 3 business days. Licensed, insured, and permit-ready. Call (949) 236-6306 and tell us what you want to change.

Home Renovation Contractors

Talk with the local team

Request Home Renovation Contractors

Call (949) 236-6306 or email info@peakstructgroup.com to schedule your free estimate. We answer the phone Monday through Friday from 8:00 AM to 6:00 PM, and we return after-hours messages first thing the next morning. For emergencies, call any time and we will get back to you as soon as possible.

3750 Barranca Parkway, Irvine, CA 92606, United States, Irvine, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now